Eurocircuits prepares the solder paste data to fit the chosen technology route for the assembly of the boards. Solder pads are either covered with paste by a printer or a jetter. The data for both are first prepared before they can be used for the in-house laser cutting of the stencil or the solder paste jetter.
![](https://www.eurocircuits.tv/wp-content/uploads/2019/02/ectavatar.png)
Eurocircuits TV
You may also like
1,726 views
1 min read
1,395 views
1 min read
789 views
1 min read